New
CEKOL A-45 Finish is a ready-to-use plaster compound based on white acrylic dispersion and top quality white natural fillers. The ready-to-use plaster compound can be used indoors, in dry rooms, on concrete and plaster substrates, plasterboard panels, standard seasoned cement-lime plasters, as well as acrylic paint coats characterized by high adhesion to the substrate.
Availability date:
23,97€
23,97€
APPLICATION AND PROPERTIES:
PREPARATION OF THE SUBSTRATE
Using a spatula, remove the remains of oil paints, and loose grains of sand. The substrate should be clean, tight and free of grease.
PRIMING THE SUBSTRATE
Highly absorbent substrates should be primed: with a deep penetrating primer CEKOL DL-80.
PREPARATION OF THE PLASTER
The plaster compound is ready to use. If necessary, mix the compound until a uniform texture is formed.
APPLICATION OF THE PLASTER COMPOUND
The product should be applied to the surface using tools made of stainless steel or plastic. The next layer can be applied after the first one dries. Layer thickness: up to 3 mm Capacity: ~1.5 kg/m2 per 1 mm of layer thickness. Drying time: depends on the layer thickness and the ambient conditions: ~6 hours with a layer thickness of approx. 1 mm (at approx. 22°C and relative humidity of 30%). Application and substrate temperature: +5°C to +30°C.