Dry Lining
Showing 1–15 of 23 results
- Dry Lining, Finish plasters
ALFA – Machine-applied Light Plus Gypsum Plaster, 30kg
Machine–applied Light Plus Gypsum Plaster ALFA is designed for indoor execution of gypsum plasters onto walls and ceilings, in rooms of standard air humidity including the kitchens and bathrooms. Can be used on substrates made of ceramic elements, sand–lime bricks, normal and cellular concrete as well as cement particle boards.
SKU: 28€18.99 - Primers
ATLAS UNI-GRUNT Deep Penetrating Primer, 1L
Most important features
- reinforces absorptive substrates of any type
- high yield, quick-drying
- decreases and unifies substrate absorptiveness
- improves bonding to the substrate
- underneath floors and screeds, adhesives, plasters, top finishes, paints
SKU: 8€6.99 - Floor Screeds, Primers
ATLAS UNI-GRUNT Deep Penetrating Primer, 5L
Most important features
- reinforces absorptive substrates of any type
- high yield, quick-drying
- decreases and unifies substrate absorptiveness
- improves bonding to the substrate
- underneath floors and screeds, adhesives, plasters, top finishes, paints
SKU: 7€18.99 - Adhesives and Mortars, Bonding Compounds, Dry Lining, Finish plasters, Joint Fillers, Plasterboards
CEKOL C-40 joint filler (16kg)
Most important features:
- CEKOL C-40 is an excellent material for pointing of plasterboard panels without using a strengthening tape.
- It is also used to refill cracks and scratches formed on the surface of walls and ceilings.
- It contains special cellulose and polyamide fibers.
- CEKOL C-40 is recommended for indoor use only.
- It is a dry compound of top quality plaster stones, white mineral fillers and modifiers.
- CEKOL C-40 meets the requirements of EN 13963 type 4B as a mixture with a standard setting time.
SKU: 6€22.99 - Dry Lining, Floor Screeds, Primers
CEKOL GS-83 quartz sand primer, 5kg
APPLICATION AND PROPERTIES:
- CEKOL GS-83 Contact is a product used for priming smooth surfaces, ceilings and prefabricated elements made from smoothly planked concrete or reinforced concrete elements.
- It reinforces the substrate, improves the bonding uniformity and increases the adhesion of plasters, putties and mortars to difficult surfaces.
- It can be used inside and outside buildings.
- After drying, the product creates a transparent rough coating resistant to water and alkaline agents. The coating does not inhibit the exchange of water vapor and gases with the environment.
- It is non-toxic and non-flammable.
*Primer – Coverage: 10 sqm
SKU: 30€20.99
- Dry Lining, Finish plasters
ALFA – Machine-applied Light Plus Gypsum Plaster, 30kg
Machine–applied Light Plus Gypsum Plaster ALFA is designed for indoor execution of gypsum plasters onto walls and ceilings, in rooms of standard air humidity including the kitchens and bathrooms. Can be used on substrates made of ceramic elements, sand–lime bricks, normal and cellular concrete as well as cement particle boards.
- Floor Screeds, Primers
ATLAS UNI-GRUNT Deep Penetrating Primer, 5L
Most important features
- reinforces absorptive substrates of any type
- high yield, quick-drying
- decreases and unifies substrate absorptiveness
- improves bonding to the substrate
- underneath floors and screeds, adhesives, plasters, top finishes, paints
- Adhesives and Mortars, Bonding Compounds, Dry Lining, Finish plasters, Joint Fillers, Plasterboards
CEKOL C-40 joint filler (16kg)
Most important features:
- CEKOL C-40 is an excellent material for pointing of plasterboard panels without using a strengthening tape.
- It is also used to refill cracks and scratches formed on the surface of walls and ceilings.
- It contains special cellulose and polyamide fibers.
- CEKOL C-40 is recommended for indoor use only.
- It is a dry compound of top quality plaster stones, white mineral fillers and modifiers.
- CEKOL C-40 meets the requirements of EN 13963 type 4B as a mixture with a standard setting time.
- Dry Lining, Floor Screeds, Primers
CEKOL GS-83 quartz sand primer, 5kg
APPLICATION AND PROPERTIES:
- CEKOL GS-83 Contact is a product used for priming smooth surfaces, ceilings and prefabricated elements made from smoothly planked concrete or reinforced concrete elements.
- It reinforces the substrate, improves the bonding uniformity and increases the adhesion of plasters, putties and mortars to difficult surfaces.
- It can be used inside and outside buildings.
- After drying, the product creates a transparent rough coating resistant to water and alkaline agents. The coating does not inhibit the exchange of water vapor and gases with the environment.
- It is non-toxic and non-flammable.
*Primer – Coverage: 10 sqm
- Dry Lining, Finish plasters
ALFA – Machine-applied Light Plus Gypsum Plaster, 30kg
Machine–applied Light Plus Gypsum Plaster ALFA is designed for indoor execution of gypsum plasters onto walls and ceilings, in rooms of standard air humidity including the kitchens and bathrooms. Can be used on substrates made of ceramic elements, sand–lime bricks, normal and cellular concrete as well as cement particle boards.
- Floor Screeds, Primers
ATLAS UNI-GRUNT Deep Penetrating Primer, 5L
Most important features
- reinforces absorptive substrates of any type
- high yield, quick-drying
- decreases and unifies substrate absorptiveness
- improves bonding to the substrate
- underneath floors and screeds, adhesives, plasters, top finishes, paints
- Adhesives and Mortars, Bonding Compounds, Dry Lining, Finish plasters, Joint Fillers, Plasterboards
CEKOL C-40 joint filler (16kg)
Most important features:
- CEKOL C-40 is an excellent material for pointing of plasterboard panels without using a strengthening tape.
- It is also used to refill cracks and scratches formed on the surface of walls and ceilings.
- It contains special cellulose and polyamide fibers.
- CEKOL C-40 is recommended for indoor use only.
- It is a dry compound of top quality plaster stones, white mineral fillers and modifiers.
- CEKOL C-40 meets the requirements of EN 13963 type 4B as a mixture with a standard setting time.
- Dry Lining, Floor Screeds, Primers
CEKOL GS-83 quartz sand primer, 5kg
APPLICATION AND PROPERTIES:
- CEKOL GS-83 Contact is a product used for priming smooth surfaces, ceilings and prefabricated elements made from smoothly planked concrete or reinforced concrete elements.
- It reinforces the substrate, improves the bonding uniformity and increases the adhesion of plasters, putties and mortars to difficult surfaces.
- It can be used inside and outside buildings.
- After drying, the product creates a transparent rough coating resistant to water and alkaline agents. The coating does not inhibit the exchange of water vapor and gases with the environment.
- It is non-toxic and non-flammable.
*Primer – Coverage: 10 sqm