CEKOL DL-80 Special Deep Penetrating Primer (5L)

DEEP PENETRATING PRIMER

• CEKOL DL-80 is a water-soluble, deep penetrating emulsion which does not contain solvents and is used for priming absorbable, mineral surfaces before applying fillers, self-levelling floors or sticking on ceramic tiles.
• It may be applied inside buildings and outside.
• CEKOL DL-80 strengthens surfaces, increases uniform binding of finishing materials used, at the same time increasing their adherence and durability.
• It inhibits detrimental chemical reactions between gypsum and cement.
• CEKOL DL-80 is a non-toxic and non-flammable emulsion.
• After drying, a transparent and slightly glossy coat is formed which is water and alkaline agents resistant at the same time allowing for water and gases to vapor.

PREPARATION OF THE SUBSTRATE

Non-grease base must be clear of loose pieces, particles, dust and of non-absorbable elements like oils, oil and acrylic paint, etc.

PRIMING

The emulsion is ready for use. The product should be applied, preferably once or twice, with a brush, a roller or by spraying. The second layer shall be applied once the first one has dried. If need be, the emulsion may be diluted with water in 1:1 ratio.

FURTHER WORK

Once the primed surface has completely dried, follow-up works may be carried out.